Billet CNC Machined Exhaust Manifold Plug
Fits:
97-99 Ford F/E Series with 5.4 and 6.8
97-98 Expedition 5.4
1998 Lincoln Navigator 6.8


Metric

This is a Precision Machined Plug that Will Seal Perfectly!

This plug can either replace the fitting in the manifold (thread directly into the connector) or thread into the fitting if it cannot be removed due to rust.

Thread size Aprox 1" Hex Size Aprox 1-1/4" (For easy measurement)

There are 2 different sizes and two different large connectors (Male and Female).
This one (Male, large) and a smaller one that measures Hex size aprox 1" Thread size aprox 7/8".

Free Shipping on ALL Orders

Surface Finish (Plate Only)

Free Shipping on ALL Orders

Billet CNC Machined Egr Delete Plate and Exhaust Header Cap
Fits:
96-10 Ford Mustang 4.6
96-04 Ford Mustang 3.8
07-14 SVT Cobra 5.4

Surface Finish

R66M-FLP

Billet CNC Machined Exhaust Manifold Cap

22mm
Fits:
97-11 Ford F/E Series with 4.2 and 4.6

96-04 Ford Mustang 3.8, 4.6
97-04 Expedition 4.6
1998 Lincoln Navigator 6.8

This cap will close the port on the exhaust manifold.

All products Proudly

Made in the USA

Surface Finish

Free Shipping in the US For All Orders

You may need to add plugs or caps to your intake and or exhaust manifolds to complete the job. We carry a line of plugs and caps, contact us with your needs.

All parts are available in: Natural CNC Finish, Polished, Powder Coated.

Current colors available are: BLUE, RED, FLAT BLACK, GLOSS BLACK CLEAR and Polished.

R66M-70802

R66M-70020

R66M-72649

R66M-70149

Egr Theory:

In internal combustion engines, exhaust gas recirculation (EGR) is a nitrogen oxide (NOx) emissions reduction technique used in gasoline and diesel engines. Egr works by recirculating a portion of an engine's exhaust gasses back to the engine cylinders. In a gasoline engine, this inert exhaust displaces the amount of combustible matter in the cylinder.

Why this is Important and Reasons to Delete the Egr Valve:

When the engine is forced to re-breath gasses from the exhaust, the engine is denied that much fresh air (oxygen). So what happens is that the engine cannot reach it's full potential since there is not as much oxygen to burn. The end result, less power. Granted, it is a small amount, but if your trying to achieve maximum power / efficiency, deleting the Egr system is a good step. Another reason that you may want to delete the Egr valve is if it has failed, which they do, and many are very expensive. Making a block off plate a much cheaper alternative. Last but not least, Egr valves are ugly and bulky. Delete to clean up and dress up your engine bay. Perfect the system by adding an Egr Eliminator as well.                                   

Note: Egr Block Off Plates are designed for use in off-road vehicles

----------Safe and Secure Shopping via Paypal----------

Free Shipping on ALL Orders

Vehicle Applications:

1994/2004  Ford Mustang / Cobra 4.6

2000-2004 Ford Focus 2.0

1993-2004 Ford Explorer 4.0

1986-2009 Ford Ranger 2.5, 3.0, 4.0

1986 - 1990 Ford Bronco II 2.9

1995 - 1997 Mazda B2300

1998 - 2001 Mazda B2500

1994 - 1996 Mazda B3000

1998 - 2007 Mazda B3000

1994 - 2009 Mazda B4000

1998 - 1997 Mercury Cougar 3.8

1999 - 2002 Mercury Cougar 2.0, 2.5

1997 - 2004 Expedition 4.6

2001 - 2009 Ford Escape 3.0

If your unsure if this will fit your vehicle you can check the vehicle compatibility list in myeBay Store.


Surface Finish
Powder Coat Color

Ford 4.6, 4.0, 3.8, 3.0, 2.9, 2.5

Free Shipping on ALL Orders

DOES NOT FIT 351 CLEVELAND! 

For 351 CLEVELAND USE R66M-72649

If your unsure if this will fit your vehicle you can check the vehicle compatibility list in the Buyers Guide.

Surface Finish
Powder Coat Color
Ford 351 Windsor, 351 Modified-302 5.0- 400 6.6

Vehicle Applications:

1979-1995  Ford Mustang  5.0

1977-1978 Ford Mustang II  2.8, 5.0

1977-1988 Mercury Comet  3.3, 4.2, 5.0

1991-1993 Mercury Cougar  3.8, 5.0

1977-1988 Ford Thunderbird  3.8, 5.0

1973-1974 Ford Ranchero  5.0

1977-1979 Ford Ranchero  5.0, 5.8, 6.6

1973-1974 Ford F-150/250/350  5.0

1973-1989 Ford Bronco  4.9, 5.8

1979-1982 Fiat X-1/9  1.5

Free Shipping on ALL Orders

Free Shipping on ALL Orders

Surface Finish
Powder Coat Color
Ford Lightning 5.4, Triton, Supercharged

Vehicle Applications:

2006-2011  Ford E-150/250/350  5.4 & 6.8

2002-2005 Ford Excursion  5.4 & 6.8

1997-2004 Ford Expedition  5.4

1998-2004 Lincoln Navigator 5.4

If your unsure if this will fit your vehicle you can check the vehicle compatibility list in myeBay Store.

 Product Description:

  • Brand New, ALL PARTS Made With Pride In The USA
  • Ready to Install. Includes a Premium Custom Made Gasket and Stainless Steel Allen Drive Bolts
  • Precision CNC Machined From Aircraft Grade 3/8" 6061 T6 Aluminum
  • Will Not Warp or Deform Like other Thinner Delete Plates
  • Use to Delete Egr Valve
  • Easily Installs in Minutes
  • Lifetime Guarantee​ - If There is Ever a Problem With the Part It Will Be Replaced FREE No Questions Asked. Your Satisfaction Is Not Just Our Goal, It's Our Promise.

Surface Finish
Powder Coat Color

Vehicle Applications:

1979-1993  Ford Mustang  2.3

1977-1978 Ford Mustang 2  2.3

1985-1996 Ford E-150/250/350  4.9, 5.0, 5.8, 7.5

1985-1996 Ford Bronco  4.9, 5.0, 5.8

1984-1987 Dodge Daytona  2.2 Turbo

1985-1987 Dodge Charger  2.2 Turbo

1984-1986 Chrysler Laser  2.2 Turbo

If your unsure if this will fit your vehicle you can check the vehicle compatibility list in the Buyers Guide.

Ford,4.9, 5.0, 5.8, 7.5, 2.3, Dodge 2.2 

Ford EGR Delete Plates

Free Shipping on ALL Orders